Fitting Instructions Vertical Blinds

During the ordering process, you will have selected either ā€˜recess sizeā€™ or ā€˜blind sizeā€™ measurements.

blind size - follow face fix instructions. recess size - follow top fix instructions

Face Fix

Each blind will be supplied with at least two brackets. Fit these brackets to the wall face approximately 5cm in from the ends of the blind. The head rail just screws in place.

Top Fix

Each blind will be supplied with at least two brackets. Fit these brackets to the lintel approximately 5cm in from the ends of the blind. The head rail just clips in place.

vb-type2-step2
vb-type2-step3


Once the headrail is fitted, the fabric vanes can be fitted. Make sure the pegs are in the open position as shown below.

The slats will not rotate if they are fitted in the closed position ( i.e. flat )

vb-type2-step4
The instructions below is for the child cord safety lock. This attaches to the wall and locks the cords in place making them safe for children to use. Click the cover into place when complete.
vb-type2-step6

In the box

toolbox-1
toolbox-2
toolbox-3
toolbox-4

Tools Suggested

  • screwdriver
  • drill (5mm)
  • pencil
  • tape measure
  • spirit level