Free delivery on orders over £149
Always Low Prices! No Gimmicks!
LifestyleBlinds.com :: Measuring Instructions: Aluminium Venetian Blinds For Victorian Conservatories

Measuring Instructions: Aluminium Venetian Blinds For Victorian Conservatories

Victorian Conservatories

Angled Bay Window
Tips
Use a metal tape measure to ensure accurate measurements

Aluminium Venetian Blinds For Victorian Conservatories Headrail Dimensions

25mm Slat
Depth 24mm | Height 25mm

Headrail 25mm Slat

 

35mm Slat
Depth 38mm | Height 37mm

Headrail 38mm Slat

 

50mm Slat
Depth 57mm | Height 51mm

Headrail 50mm Slat

 

Step 1: Choose the slat size

When measuring for angled conservatories you need to allow for the head-rail and valance depth and window handles which affect the size of the blind when fitted.

There are 3 different slats sizes which will affect the sizes of the brackets and head-rail, 25mm/35mm/50mm.

Once you have chosen the slat size you can use the illustration above to determine the allowance which will be referred to as X for the next step.

Head-rail Allowance:

25mm slat size: X = 24mm
35mm slat size: X = 38mm
50mm slat size: X = 57mm

Step 2

Find the handles allowance. If you have window handles, measure how far out they protrude. e.g. 5.5cm (55mm) in the image opposite. This will be referred to as Y for the next step.

example Y = 55mm

Step 2

Calculate total allowance.
Add (Y) to the allowance for the head-rail and valance depth (X) that you noted down from the previous page to get Z.

Total allowance will be calculated using the following:
X + Y = Z

how-to-measure-aluminium-venetian-blinds-for-angled-bay-windows

Step 3

Take an A4 sheet of paper and cut in half. Place the two pieces of paper next to each other and mark a line at measurement Z.

e.g.
25mm slat size, window handles 55mm
24mm (x) + 55mm (Y) = 79mm (Z)

shade-in-to-mark-frame-side-of-paper
how-to-measure-aluminium-venetian-blinds-for-victorian-conservatories

1) Place the pieces of paper on the window sill touching the frame and slide together until the two lines meet.

2) Then using a pencil make a mark on the window sill at the point where the corner of the fabric meets the frame.

3) Repeat on the other angles around the conservatory.

how-to-measure-aluminium-venetian-blinds-for-victorian-conservatories

Measure the distance between the two pencil marks on each window around the bay as shown on the illustration. This will give you the widths the blinds will need to be.

Order all blinds as EXACT SIZE

Drop

Measure from where the top of the bracket is to be fitted to the window sill. Check the drop all around the conservatory as it will often differ.

Order all blinds as EXACT SIZE

Download a pdf of Measuring Instructions: Aluminium Venetian Blinds For Victorian Conservatories
 
 

By clicking “Allow All”, you agree to the storing of cookies on your device to enhance site navigation, analyse site usage, and assist in our marketing efforts. Find out more